ExchangeDefender

SPAM Worse Than Ever But About To End?

Take a look at the following article discussing the current state of SPAM, discussed by the ones with perhaps most to gain: antispam vendors. As a highly biased vendor, I can tell you that the threat description by the marketers below is pretty much dead on. The logic at the end is horribly flawed because it questions the end of spam because the consumers now have freebie filters and commercial mail is getting more difficult to send.

Quite the contrary, dear Watson. The SPAM has gotten far less expensive to send because it is being distributed through huge botnets that do not send enough SPAM to get blacklisted quickly outside of the honeypot system. At the same time, it has gotten prohibitively expensive to filter mail at the server and/or the gateway – We sign up dozens of customers daily, almost all of whom are pulling out GFI and Barracuda appliances. Those systems are now worthless, despite their cost advantage over hosted networks, because they cannot handle the volume of mail being sent – even the largest appliances are getting overflown in SMB not to mention the tight T1 or broadband pipes.

Hosted SPAM filtering is taking a hit as well. Those “free” offers are going away and effective hosted filters are starting to raise prices. Hosting companies are also adding larger premiums for this service, cornering customers to use the client-based SPAM protection, having to rely on Outlook Junk Mail filters.

As my favourite demotivator says: “It’s always the darkest right before it goes pitch black.”

Now, here is the article:

"Two years from now, spam will be solved."

— Microsoft's (MSFT) Bill Gates, 2004, World Economic Forum in Switzerland

SAN FRANCISCO — Why, in 2007, is spam worse than ever? Let exasperated consumers count the ways: PDF spam. MP3 spam. Pump-and-dump spam. E-card spam.

It may sound like a broken record, but spam continues to do just that — break records. This year marks the first time the total number of spam e-mail messages sent worldwide, 10.8 trillion, will surpass the number of person-to-person e-mails sent, 10.5 trillion, according to market researcher IDC.

"Every year for the past four years has been the worst year yet," says Rebecca Steinberg Herson, vice president of marketing at e-mail security firm Commtouch.

Unwanted commercial e-mail touting Viagra, get-rich-quick schemes and more is growing by electronic leaps and bounds: an Internet-buckling 60 billion to 150 billion messages a day. "It was one of the rare times (Gates) was wrong," says David Mayer, a product manager at e-mail security firm IronPort Systems, a Cisco Systems (CSCO) division.

The sheer volume of unwanted commercial e-mail is like a tidal wave, washing over the best-built digital dams and, despite a federal anti-spam law, resulting in spam leaking through to consumers.

Feeding the spam-alanche are advances in spamming techniques, the rise of bots — millions of compromised PCs that spew spam — and the fact that more people have multiple e-mail addresses. Market researcher The Radicati Group estimates there will be 2.4 billion e-mail accounts worldwide by year's end.

Eliminating spam is "a war you cannot win," says Greg Toto, vice president of products and operations at computer security firm BigFix. "It is much cheaper to send spam than stop it. Spam is becoming more specialized, and spammers are taking advantage of bad practices by consumers and businesses.

"The stuff continues to spill through," Toto says.

A surfeit of spam

And how. Despite Gates' bold prophecy, a revolving door of anti-spam products and the Can-Spam Act of 2003 — whose advocates breathlessly predicted would deter spammers — the total volume of meddlesome stuff has continued an inexorable climb.

So much so that Gates recently clarified his 3-year-old prediction.

"I never said it would be solved," Gates said in an interview with USA TODAY last month. "I said it would be substantially reduced, and in fact it has been reduced a lot."

When reminded that numbers are spiking, Gates begged to differ. "Sure, there's a lot (of spam) out there, but software is deleting 99.9% of that anyway," he said. (Microsoft now pegs the figure at 85% to 95%.)

Spam is popping up in different guises — whether as attachments that appear to be PDFs, MP3 files and Excel spreadsheets — to evade anti-spam services, says Scott Petry, founder of e-mail security firm Postini, a subsidiary of Google (GOOG).

Faux electronic-greeting cards, containing links to viruses, have also picked up. Since July, Postini alone has blocked more than 1.5 billion copies of Storm, an e-mail virus masquerading as a greeting card.

Meanwhile, spam containing PDFs, non-existent in May, now accounts for 8% of unsolicited commercial e-mail. "The bad guys have taken a highly mutated approach because they're only paid for what gets through," says Jose Nazario, senior security researcher at Arbor Networks.

This summer, a PDF promoting a pump-and-dump scam urged consumers to buy shares in an obscure company called Prime Time Group. Anti-virus firm Sophos reported a 30% spike in spam moving across the Internet at the time, fueled by the missive. The fraudulent spam messages were sent from compromised home PCs by Storm, the e-mail worm that entices victims to click on tainted e-card links and thereby turns their PCs into spam-spewing bots.

Although Sophos blocked more than 500 million copies of the Prime Time PDF, it is likely the Internet was swamped by several billion copies of this particular piece of fraud spam. Many copies were getting blocked by anti-spam filters, but some made it to unprotected in-boxes.

"As long as even a small percentage of people continue responding to pump-and-dump scams like this, the problem will continue to exist," says Ron O'Brien, Sophos' senior security analyst.

And then there is phishing, those fraudulent e-mail and websites designed to rip off personal information. An insidious version of spam, its levels are at all-time highs. In July 2007 — the most recent month for which data are available — the Anti-Phishing Working Group said new phishing sites pole-vaulted to 30,999, from 14,191 in July 2006.

One in 87 e-mails is tagged as phishing scams now, compared with one in 500 a year ago, according to e-mail security firm MessageLabs.

Fighting back

All is not lost, however. Consumers and corporations are getting creative to cope with the problem, operating on the premise that spam is inescapable.

"You can't eradicate (spam), but you can manage the problem," says Arbor Networks' Nazario, who compares spam to the flu.

Industrious e-mail users are using an exotic mix of software and services to tamp down spam across several fronts. Think of it as their idea of spam inoculation.

For a start, tens of millions use Google's Gmail because it was designed with built-in spam defenses. Others are joining social-networking sites such as Facebook and MySpace, where they control who has access to their personal profile, to exchange e-mail with friends, family and business associates.

Many also use phishing filters provided by Microsoft on its Internet Explorer browser. Last month, Yahoo, eBay and PayPal took a major step to shield customers from phishing attacks. They announced eBay and PayPal customers who use Yahoo Mail should start receiving fewer bogus e-mails because it now uses DomainKeys, an e-mail-authentication technology.

A new breed of e-mail services, such as CertifiedEmail from Goodmail Systems, put the financial onus on the senders of unsolicited commercial e-mail.

CertifiedEmail treats e-mail as a FedEx-like service. For less than one-fourth of a penny per message, commercial marketers, government agencies and non-profits are guaranteed delivery of e-mail to individuals who have indicated they will accept the messages from that specific sender. Recipients see a blue seal verifying that the message is legitimate, says David Atlas, senior vice president of worldwide sales and marketing at Goodmail.

Another free option, Boxbe, lets users of Gmail, Microsoft Outlook and Yahoo Mail create a guest list, giving them final say on who is allowed to send e-mail. Anyone not on the list receives an invitation to join when they send an e-mail to the Boxbe user.

The multilayered-defense approach has worked to stop such scourges as image spam, which varied the content of individual messages — through colors, backgrounds, picture sizes or font types — to slip through spam filters. Image spam made up half of all spam in January. Since software makers came up with a solution, image spam has dropped to 8% of all spam, Symantec says.

Given all of these free available solutions, and their success in some cases, could the future be brighter for spam-slammed consumers?

Richi Jennings, lead analyst for e-mail security at Ferris Research, thinks so. He expects evolving anti-spam technology to slowly choke off unwanted commercial e-mail.

Could Gates' oft-disparaged prophecy be right, after all?

"As more people have in-boxes protected by better and better spam filters, their experience of spam gets closer to Gates' vision," Jennings says. "He was a bit overaggressive with the prediction, of course. But spam isn't an easy problem to solve."

Contributing: Byron Acohido

How do I get ExchangeDefender to deliver inbound mail to multiple IP addresses?

I was sitting around writing some documentation and felt compelled to share some general knowledge on how Internet mail is routed around. The basic problem / solution here is how do I get a multihomed Exchange environment on the cheap? Enjoy.

Please first consider the following document: ExchangeDefender Deployment Guide

ExchangeDefender can deliver inbound mail to a static IP address or perform an MX lookup and deliver to the first available server. We support secure TLS delivery to both IPv4 and IPv6 addresses.

If you have multiple static IP addresses that you wish to deliver inbound messages, ExchangeDefender can perform an MX lookup in order to deliver mail to one or more mail servers. Larger clients tend to have multiple Internet providers on multiple IP ranges and use them to provide failover service or load balancing. ExchangeDefender fully supports this configuration.

In order to get ExchangeDefender to deliver messages to either a failover or load balanced connection that has multiple external IP addresses you need to create another MX record in your domain and add the hostnames of the IP addresses to that MX list. Your default @ MX record for the domain will still point to inbound30.exchangedefender.com but ExchangeDefender will deliver to your new MX record. Here is an example:

# Primary / default MX record
@ in mx 10 inbound30.exchangedefender.com.

# Host records for individual mail servers
mail1     in a 65.99.192.2
mail2     in a 65.99.255.3

# MX record for direct load balanced / failover access
directmail  in mx 10 mail1.domain.com.
directmail  in mx 20 mail2.domain.com.


In the example above, your default / primary MX record for domain.com is inbound30.exchangedefender.com. You have defined a hostname on each IP range you own as mail1.domain.com and mail2.domain.com. Finally, you have created a new MX record directmail.domain.com that will resolve to mail1.domain.com and mail2.domain.com

Under this example external mail for user@domain.com would be sent to inbound30.exchangedefender.com. ExchangeDefender would then route the message according to the MX lookup for directmail.domain.com which goes to mail1.domain.com or if unavailable to mail2.domain.com. This is the failover configuration. If you set the weights on directmail MX record to 10/10 (or any other numbers, so long as they are equal) then ExchangeDefender would deliver mail in a round robin fashion allowing for load balancing.

This configuration is independent of router choice, because it does not require the router to fail over the link. You could just have multiple routers with multiple gateways on your network. This configuration will work with virtually all routers and load balancers on the market because it uses DNS to route mail, not a hardware switch.

Of course, to set the MX record to deliver mail to access your ExchangeDefender configuration and click Advanced Settings for Inbound mail.

Important Notes:

  • Make sure you check that the MX record exists, nslookup -q=mx directmail.exchangedefender.com should return two or more mail servers. If it returns invalid domain, something went wrong.
  • There is a difference between a host (A) record and a mail exchanger (MX) record - if you point ExchangeDefender at a host the message will bounce.
  • This is an advanced network topic and we strongly advise it be done by a competent IT Solution Provider, please contact us for a reference.

HOWTO: Troubleshooting Mail Delivery

One of the most frustrating things I do for living is troubleshooting mail delivery. Not because it’s incredibly frustrating and almost never my fault, but because I tend to get pwned by the most ridiculous “gotchas” of the SMTP.

Of the items that I probably deserve a Darwin Honorable Mention award for is troubleshooting delivery for an expired domain name, for a mail server that had the SMTP service stopped, that had the IP address changed, that had the letter 0 or O in the domain name and they just blurred together.

So today I set myself up for another “documentation writing” day and I have to say that I enjoy it. Writing about the products I’ve designed makes me realize how braindead some of our process is, nothing sounds quite so stupid than when you read it back to yourself. It also gives me ideas on how to improve the service, add in some gizmos that could help cut out a lot of time from troubleshooting.

Today, I proudly bring you the OWN Guide for Troubleshooting ExchangeDefender Delivery. Even if you are not an ExchangeDefender customer (come on!) the guide is general and verbose enough to give you an idea how to troubleshoot mail flow, diagnose issues with SMTP servers, create sample email messages from the command prompt.. I really hope you like it.

At the very worst you’ll learn how to install the telnet client for Microsoft Vista / 2008 Server from the command prompt.

OWN: Fixed

As promised, this is the first public showcase of what we’ve been up to for the past two weeks and what we are doing to improve communications, relationships and documentation over at Own Web Now. I’m the CEO so you get to hear it directly from me, first. It is not quite as simple as a single blog post so I will take the rest of the week to explain the changes in detail because for every person you please you’re bound to piss off another. I am not necessarily concerned with wheter you like me, but at the very least I hope you understand where I am coming from and at that point its your call whether you become/quit/stay our partner.

The big picture: The goal at Own Web Now Corp, over the past year and over the coming months, is working to further the global network presence, both in terms of hardware and its partners. We will do this by making significant improvements to our systems, centralized management consoles and both partner and end user training.

In terms of infrastructure, we’re there. 14 data centers, full staff, products and services in R&D. We’re moving forward in a very big way. Three weeks ago a number of things became very apparent as huge problems, something we have moved very quickly to address and fix. Broken is broken, we picked up and glued back a lot of pieces.

So, here are the improvements, in a nutshell, I will break them down over the course of the week:

Communications: Corporate Blog: Corporate blog will be the main information site for the OWN business in terms of product announcements, major service items, opportunities, etc.

Communications: Network Operations: Network operations blog focused on the service aspect of Own Web Now: What we are doing, who we are doing it with, what the problem is, what the resolution is, etc. Your day-to-day OWN operational problems.

Documentation: ExchangeDefender Web Site: Our flagship products first update in over two years and two major releases. It brings the long demanded “trial signups”, documentation, feature descriptions to explain benefits of the service to customers, etc. Most importantly (and in highest demand) this site makes it easy to get started with us.

Documentation: OWN Documentation Center: New wiki that we will be brining most frequently asked questions to. Nearly all of our products behave just as you would imagine and as the documentation indicates – but whenever there is something left to the interpretation we will throw it up on the wiki.

Business: Updated Partner Guide: For close to a year we did not have an updated Partner Sales guide, which resulted to a lot of people asking for a resend, current information, etc. Now the most up to date partner guide will always be available online, on demand, in our support portal under Services.

Business: Price List: Also embedded under our partner portal under Services is the Pricing List that you can use when putting together quotes. These are the latest, most up to date prices on our key products.

Almost last, but definitely not the least:

Business: SUICIDAL?: Public feedback: Every now and then you’ve got something to say but you don’t want to say it out loud and have it associated with your own name. While your best friends will always level with you and give it to you exactly how it is, most people are not comfortable with that level of intimidation. So, we have a public feedback link. I am not posting the public side of it here (will be emailed to you in the newsletter) but you can see the public results of the feedback here. Any submissions to the public site are reflected on the private support portal side in realtime, we do not block anything, even if you’re filthy. We have a 72 hour response time guarantee on every piece of feedback left, so hopefully it will give us better insight for the problems as they happen as they affect you, not six months down the road when its too late. The feedback is totally anonymous, we do not even collect the IP address, just subject, feedback and product category. We stole this from NewEgg.

Finally,

Newsletter – Emailed, every month, every third or so. I will be mailing the first issue this week.

So as you can tell, we’ve been busy.

Let me repeat – OWN is not a bunch of bored hobbyists who got tired of the VAR game and decided to branch out into services, we have a decade of infrastructure knowhow, the funding, flexibility and one of the largest partner networks in the world. So yeah, you can bet that I will personally do whatever it takes to make our partners better, our clients more informed, listen to that feedback and make you better off. There are thousands of people making a living off of what we do, have done for a decade and will do so for decades to come. We’ve been doing this for a long time, and will do it bigger, better and uncut….

This, however, is just the first step. Look at the above, and watch it grow.

P.S. More details on all this over the coming week.

The Coolest Thing We Did This Year

As I sit here in my new Atomic Tangerine office I know I have a lot to be thankful for. As much as I like to complain about everything that is going wrong, because after all this is my only outlet, things are pretty damn phenomenal over here. I get so much fanmail about literally everything we do that it’s hard to pick out just one thing we do really, really well - it’s difficult to even prioritize. For example, I got woken up at 3 AM this morning with a request to put up a blog post saying that yes, everything is OK, even though a 5.6 magnitude earthquake rocked our MAE West data center in San Jose.

There is one feature though, that really seems to have gotten a superhero status within ExchangeDefender. I am pretty much ashamed to the core of my soul to admit it because it’s that classic Microsoft innovation irony, of throwing together crap that has existed for decades and pretending its the next coming of Christ.  

But customer is always right and I’ll take all the fanmail I can get.

The feature I am talking about is called ExchangeDefender LiveArchive (our new ExchangeDefender web site that goes live tomorrow or its third prize boys).

The reason I can talk about it shamelessly is because, like the Microsoft Innovation Directive #109 states, it’s finally out of 1.0 and ready for prime time and is damn near flawless after we rewrote a major part of the authentication that was just a nightmare.

What’s this innovation I speak of? Well, we’ve built an exact replica of your mail server in the cloud! It’s distributed, it’s seamless, it keeps last 7 days worth of email and it works in realtime – read, send, reply, forward or delete email with your own identity, signature, name and any email address in your Exchange profile. Did I mention that its free? Yup.

Now, to the observant and educated eye this is just a webmail with a stateless copy of all inbound email. However, to the gullible IT staffer I am Vlad, defender of all email.

Most importantly, to the organization that just had its fiber chopped in half, Dell server processor meltdown, corrupt Outlook profile or Exchange mail store crash that will take eseutil 3 hours to rebuild….. this is Vladfairy sprinking his magic SMTP dust that makes business communication fly.

Must….stop….drinking… at…. work.

I cannot even begin to quantify the number of people that have emailed us to thank us for this feature and all its been able to do for their users. I now know of every major disaster, Internet outage and brush fire because people email me to tell me they were able to stay in business without a second thought because they just continued to work as is.

With the hurricane spinning just off the coast of Florida, my community that has been hit from every angle imaginable by every name in the dictionary, this feature and this feature alone is what makes my job worth doing. Even if the whole day gets wasted writing a newsletter.

Thank you to all of those that have supported and used ExchangeDefender through the years. Your money, through the good and the bad times, has made it possible for things like this to come to market and really make a life-or-death of business value to all our clients.

Thank you.

MSP Talking Points & Presence

Yeah, yeah, I am again robbing Microsoft. I think in their lexicon thats called “innovating” but you can only lie to yourself so much: I got this idea from Eric Ligman.

First off, here is the new ExchangeDefender MSP report:

Executivespamreports

So my bit of innovating involves me allowing you to stick an <iframe> tag in your web site or your customers web site giving them realtime access to how bad the spam situation may be. With your logo and all that good stuff on it, of course.

But that third blue box from the top is perhaps the most important one on the page because I see it as the most demanded feature among my products: MSPs want talking points! You all get charts and pictures and spreasheets and junk from the tools you’ve subscribed your customers to, but you don’t have a really great story to discuss with them. Ever notice how even the lowest wage earners lean over the cash register in the supermarket and circle the amount you saved on your grocery bill? Why? Because it reinforces the message that something is being saved by spending money at that store.

So, three is a start. I am giving you data and pretty animated pictures to discuss how many messages are being processed, how much bandwidth is being saved and just how much productivity is being conserved thanks to ExchangeDefender. Want more talking points – tell me what matters and I will build it.

Why are these important? Well, being an MSP is kind of like selling futures – you’re guaranteeing a certain future scenario for a certain price. So you’ve bought Ericks book, you’ve listened to my SBS Show podcasts, you’ve sold your MSP plan. You’re going to be a life saver the first month. You’re going to be great the second month in. By month number three you’re still pretty good. Six months into the contract they might be scratching their head – WTF is that geek still doing here, we don’t have any computer problems anymore?

That, in a nutshell, is why I’m building the remoting indicators to help you syndicate these charts direct to your customers in a way that they can see them day-to-day. Same goes for the ticket counters and reporting that I am currently coding into the Shockey Monkey. I literally want to enable my partners to have a s***bar on each customers SharePoint that says the following:

You are this f**cked without us:

# Spam Blocked, # Tickets Answered, # Patches Applied, # Computer Maintenance Tasks Performed

But for now, as I rob Microsoft, I’d like your opinion – what type of data would give you more talking points with your clients to justify what you’ve sold them from my stable? This goes for all the products, not just ExchangeDefender.

 

)!).*:[!-(:.).-+.*)

Got one of these gems forwarded to me by one of our customers earlier tonight, asking how we went about filtering something like that:

Subject: )!).*:[!-(:.).-+.*)

Sy!m]b*oool F]D:E(G
Last 0.04
T ar ge+t 0.12
!

Now, you can pretty much guess that with the amount of email we get there is no single person sitting in front of the screen saying “SPAM, “NOT SPAM”, “SPAM” – even if there was one I’m sure they would make a mistake more often than the computer does. But fair question, how do we go about nuking something like the above?

I’m about to let you in on how we write rules to identify messages like the above.

First, look at the subject. What do you notice about it, just on the face of it. Just a bunch of characters, junk. Right. But look closely. What’s missing? A word. But how do I know whats a word and what isn’t? Simple, you look for a continuous set of characters A-Z or a-z or mix thereof. Do you see any? Nope? Ok, bump the score.

Second, and a lot less error-prone – whats else is interesting about that subject? Well, there are no alpha characters in it. As a matter of fact, if you’ve received a few hundred of these you’d notice that none of them have any alpha characters in them! What are the odds that a legitimate piece of email would have a subject that didn’t have a single alpha or numerical character in it and that it wasn’t empty? If they are good, you receive a lot of email from your dog or cat or whatever type of an animal crawls over your keyboard. This however can be error prone, for example, what if you’re dealing with a CRM system in China? What if you dealt with people that have no netiquette? (ever had a customer send you a message with a subject: “HELP !#$!%@#!%$!#^#!^!^!^!# me!”)

Now, on their own, the two rules can lead to some false positives, that is, legitimate message being flagged as SPAM. But the two rules with a relatively low score lead to a less likely false positive match if the subject was just garbled or the body got garbled. Together, the score is higher and we take our gamble on trapping it.

There, see how easy that is?

P.S. If it still has a garbled subject and a garbled body and you still receive a lot of messages like that during your workday you really need to find a better way to communicate with your cat while you’re at work. Teach her how to use IM or something

Heading to ConnectWise Conference? Take this with you..

Heading to the ConnectWise Conference this week? If so, take this one along with you:

Whitepaper: ConnectWise sync with ExchangeDefender How-To

Thats right, in 5–10 minutes you can have your ConnectWise deployment syncing up with ExchangeDefender and becoming a regular resident on your Management Reports. So tell the other guys that the new sheriff is in town and he’s not selling your customers privacy out to Google!

Ok, so it’s a cheap dig but this one actually means something: the integration provided (and stats collected by ConnectWise) are so basic that they may as well be random useless numbers. Keep an eye on this blog for what I’m currently cooking up with my team to let you show the true benefits of having ExchangeDefender protecting that network. 

SMB Mail Failover - 1-2 punch knocks out SMB mail availability troubles

Just another thing I manage to squeeze into this weekends ExchangeDefender feature pack, support for multihomed Exchange (SBS included) servers. But a bit of background first:

Traditional SMB deployment of failover / high availabilty Internet access is a scaled down enterprise approach – get two dedicated T1’s or better from different providers, big Cisco or Juniper router, ASN number along with a dedicated IP allocation, announce both ranges and with BGP4 you’ve got a multihomed, highly available deployment.

The only trouble with the above is that complexity is way beyond the SMB IT skill set and cost is hard to swallow as well. So what a lot of SBSers have turned to are devices that allow multiple broadband connections and provide HA using DNS round robbin and MX weights. With a decent router this type of a solution with bandwidth would cost less than a single T1 and be setup in a day. Tim recommends the Secure Computing & CyberGard products, Erick recommends SonicWall Pro 2040, 3060, 4100, 4060 and 5060.

ExchangeDefender in the mix…

If you look at your ExchangeDefender account configuration it might look a little like this… Nothing interesting there, just type in the IP addresses and you’re ready to go..

Xdfailover1

But click on the Advanced Settings text and it turns to this:

Xdfailover2

And as you can tell, its ridiculously simple to setup ExchangeDefender with a multihomed configuration. Insead of providing an IP address to deliver mail to, you can provide a fully qualified domain name (mailserver.yourdomain.com) and you can also provide an extra IP address to route outbound mail through our outbound grid.

What happens on the backend? Well, DNS is looked up at delivery time and the ExchangeDefender delivery agent acts as a real mail server – it gets an MX record list, orders the weights in ascending order and hunts down the list. First available server that answers gets a conversation started and mail delivered. On the flip side, by adding an extra IP address to ExchangeDefender’s outbound network you can turn up high availability and load balancing on your outbound link and let mail go out using both network interfaces.

Now, couple all this with the ExchangeDefender LiveArchive and… frankly… you can pull off 99.999% if you design your network correctly – and we’ll guarantee the 99.999% on the archive.exchangedefender.com so you’re all set.

Caveat

I know what you’re thinking and no, don’t do it: “Sweet, I can now bring over all my dyndns customers!”; Technically, you can. Practically, I wouldn’t do it. Here is why – we cache our DNS lookups. So if you put in a DYNDNS server that has a frequently expiring IP address and your TTL doesn’t match mine.. well.. Just don’t do it.

But in case you have a fairly reliable connection and you don’t need 100% guarantee that the mail will get there, and you absolutely cannot get a business line and you totally have no way of getting a static IP address.. well, you’re still screwed, but we’ll work with you. You can route your mail through your ISPs smarthost (not recommended) or you can route it through our outbound grid (recommended) but you’ll have to use SMTP authentication and relay mail via SMTP-over–SSL. That means modifying your Exchange SMTP configuration and opening a ticket in support.ownwebnow.com to get a username and password for SMTP SSL. But, small price to pay if all you’ve got is dyndns or noip.

Conclusion

I’m listening to you guys…. I thank you for your business and we’re working tirelessly here to keep on addressing all the concers that the SMBs have and we’re making this a winning product. We’re now integrated with Autotask and Connectwise, we now support HA and we offer realtime business continuity, extended archiving, encryption…. and.. well.. nobody else can say that. So thank you for putting up with the v3 troubles, aren’t you glad you stuck around? You can kill your competitors with the ExchangeDefender feature set offer alone! I know I do.

ExchangeDefender, Dave Sobel, AutoTask, Resends

Since the ExchangeDefender 3.0 and 3.1 releases went smooth as ass on sandpaper and nails, we’ve made quite a few changes to the way its developed, tested, rolled out and managed. So, here is what I was working on today:

New Reports

Or should I say, new new reports. One of the biggest customer complaints has been the lack of the ability to suppress empty quarantines. Basically you would get a Daily and/or Intraday report but it would include all the email addresses even if they had nothing in them. If you have half a dozen email addresses it starts to look ugly, quickly.

One of my pet peeves has been the constant nagging about “customer did not receive report, investigate”

So, below is the new stuff that hopefully makes everyone happy and most importantly, makes the user more productive. First, me: the blue box you see on the right side is the stock advertising spot – as an MSP you can modify this box to say anything you want it to say. Got a yard sale – let your ExchangeDefender customers know it. By default, however, it serves a functional purpose of letting the user know that there are more messages waiting for them, in a much nicer environment that is searchable, intelligent and accessible in realtime – so no waiting for daily or intraday reports if you need something quick.

Xdreports

Now on to the customer complaints – “Stop telling me about SPAM I am not receiving.”

Ok, done. Both the user, the domain administrator and the MSP have the capacity to suppress quarantine reporting if those quarantines are empty. By default, we print quarantines for each email address and say if its empty – but if you change the setting you will only see the quarantines for the email addresses that actually have SPAM or SureSPAM trapped in them.

Xdreports1

And the techies… this is going to save a lot of time:

You can now send a daily report to any managed email on your system – on demand. Gets generated within 60 seconds, out in a minute or so more. But… it gets better, scroll down.

Xdreports3

Dave Sobel Feature

Dave was one of the first people I showed the beta of ExchangeDefender v3 MSP console. When it launched, Dave took exactly 15 seconds to nuke one of his domains accidentally. I am not sure how he did it, but it was a record nonetheless and I felt like an ass.

So, we now have what is called a Dave Sobel rule in the house. It’s that of validating any irreversible action in the system with a javascript popup. This little function took 8 lines of JavaScript code and took 45 minutes to write – no, I am not kidding, it was an ugly morning. Judy finally put me out of my misery by rewriting (adding 2 parameters to the call) the whole thing and saying “Bitch, now where my pink Inspiron at?’

Xdreports2

Finally…

And I do mean…. fiiiiiiiiiiiinally. There are gonna be some fans in the House of Vlad next week:

Livelink

Yep, you’re seeing that right – thats ExchangeDefender integrated into AutoTask! You can actually get the LiveLink right now, huge thanks to Steve Noel of AutoTask for hooking this up and to Kevin Baylor for specing it and pushing to get it done.

There are some other exciting things coming and I just wanted to show you how this thing is progressing. Next week the new ExchangeDefender web site launches too, along with the new Shockey Monkey and the public beta of Thieving Weasel… Crank that shocky stick baby, code monkey is on fire!